DC: DinoKoll Tile

One-component cement-based adhesive for indoor and outdoor installation of single and double fired materials on cement- based substrates.

. DC:

DC is abbreviation of Dinokoll Tile adhesive for Ceramic corresponds EN12004 in Clclass.

- C1: standard setting cement-based adhesive.

  • Application:

- To install all types of floor ceramic tiles for indoor use.

- To install all types of cement and brick blocks.


- Easy to prepare and apply


The best pulling adhesive with notched trowel and back of tile with thin spatula.

The thickness should not more than 10 mm and 3-4 kg/m2 for one side and 4-5 kg/m2 for both side in small size and 5 kg/m2 for both side in medium size and 4-5 kg/m2 for one side and 6 kg/m2 in both side in biger. and the water ratio is about (22% -24%) weight of adhesive.

چسب کاشی و سرامیک معمولی – DC

Initial tensile adhesion strength (after 28 days)

> 1 N/mm2

Tensile adhesion strength after heat ageing 

> 1 N/mm2

Tensile adhesion strength after water immersion

> 1 N/mm2

Tensile adhesion strength after freeze-thaw cycle

> 1 N/mm2

Open time

10 min


  • Cleaning:

After finishing the installation of porcelain and its grouting, the joints should be cleaned immediately with a sponge and water. Other than this, after the grouting material hardens, you must use a specialized cleaner material from Dinokoll to clean the remaining effects of cement and grouting materials.

  • Storage:

The place where the adhesive is stored should be cool and dry, and the adhesive should be kept in a closed envelope.

The best consumption time is one year after the production date under the above conditions.

  • Responsibility

This company fully accepts the qualitative and quantitative responsibility of all its products in accordance with the relevant standards and will be responsible for any deficiency. But matters of how to maintain, use, operate, and implement it are the responsibility of the respective customers.

  • Safety measures:

This product contains Portland cement, which leads to an alkaline reaction when in contact with moisture. Use gloves while using the product; in case of direct contact with the skin, it will cause burning, dryness, and cracking of the skin. It may cause an allergic reaction.

In cases of direct contact with the eyes, it may cause sensitivity, burning in the cornea, or even chemical burns. In the event of contact with the eyes, wash with water for 20 minutes and then consult a doctor.

In addition, detachable elastics must be used every 25 square meters inside, every 10 square meters outside, and every 4 meters in height.