DP: DinoKoll Porcelain

Ultra-white one-component thixotropic cement-based adhesive, with improved adhesion for the installation of medium sized porcelain stoneware indoors and outdoors, even for tile over tile application, and on heating substrates.

DP:

- DP is abbreviation of Dinokoll Porcelain adhesive

-corresponds EN12004 in C2T class.

C2: refer to cement based adhesive improved

adhesion.

-T: is adhesive with limited vertical slip.

  • Application:

-Usual porcelain wall and floor façade porcelain

ceramic tile, inside and outside, terrace, balconies.

- To apply for heating screeds.

- TILE over tile application.

  • Advantages:

- Easy to prepare and apply

- No sliding in vertical applications.

- Long using period, extend open time.

- Appling tile over tile on heating screed.

- Water retainer and flexible.

  • Consumption:

- The best pulling adhesive with notched trowel and back of tile with thin spatula.

The thickness should not more than 10 mm and 3-4 kg/m2 for normal size and 4-5 kg/m2 for size. and the water ratio is about (24% -28%) weight of adhesive.

Floor porcelain Adhesive - DP

Initial tensile adhesion strength (after 28 days)

> 1 N/mm2

Tensile adhesion strength after heat ageing 

> 1 N/mm2

Tensile adhesion strength after water immersion

> 1 N/mm2

Tensile adhesion strength after freeze-thaw cycle

> 1 N/mm2

Tensile adhesion strength (after 6 hours)

> 0.5 N/mm2

Slip

< 0.5 mm

Open time

20 min

 

  • Cleaning:

After finishing the installation of porcelain and its grouting, the joints should be cleaned immediately with a sponge and water. Other than this, after the grouting material hardens, you must use a specialized cleaner material from Dinokoll to clean the remaining effects of cement and grouting materials.

  • Storage:

The place where the adhesive is stored should be cool and dry, and the adhesive should be kept in a closed envelope.

The best consumption time is one year after the production date under the above conditions.

  • Responsibility

This company fully accepts the qualitative and quantitative responsibility of all its products in accordance with the relevant standards and will be responsible for any deficiency. But matters of how to maintain, use, operate, and implement it are the responsibility of the respective customers.

  • Safety measures:

This product contains Portland cement, which leads to an alkaline reaction when in contact with moisture. Use gloves while using the product; in case of direct contact with the skin, it will cause burning, dryness, and cracking of the skin. It may cause an allergic reaction.

In cases of direct contact with the eyes, it may cause sensitivity, burning in the cornea, or even chemical burns. In the event of contact with the eyes, wash with water for 20 minutes and then consult a doctor.

In addition, detachable elastics must be used every 25 square meters inside, every 10 square meters outside, and every 4 meters in height.