• Diskoll:

-Diskoll ready adhesive is an adhesive based on acrylic emulsion resins with the characteristics specified in the table below, and it is generally referred to as )Do-It- Yourself( adhesives in the world.

-Therefore, logically, this adhesive is not recommended for general and general purposes of buildings and projects, and it is better to use powder adhesive in such


- Paste adhesives can be used to optimize the preparation time for immediate and small uses. - According to the standard criteria, two types of paste adhesives are recommended as follows:

1- paste adhesive (DIT) DISKOLL (10) for installation of tile, ceramic and stones.

2- paste adhesive (D2TE) DISKOLL (20) for installation of tile, ceramic and stones in low humid areas.

  • Application:

-The ready to use adhesive is suitable for performing the necessary tasks in installing ceramic and stone tiles on surfaces

- Can be used to install ceramic tiles on stone, ceramic and cement surfaces

-It can be used for special purposes and to the extent of installing ceramic tiles in the optimal use of time in the preparation of the adhesive

  • Privilege:

- Ready to use without adding other ingredients - Strong adhesion, resistant and flexible against the settlement and vibration of the building

- Easy and convenient implementation

- relative resistance against moisture and water according to the standard specified in the table below

Paste adhesive DISKOLL 10






1.5 g/cm3

Resistance to water


Adhesion strength – EN 1324

> 2 N/mm2

Open time

20 minutes


< 0.5 mm

Working Temperature


Time for bonding

2-3 day

Ready to use

7 day

Storage conditions

6 months in dry and cool places