Floor and wall porcelain Adhesive – DPWF
15
نفر در حال مشاهده این محصول هستند!
DPWF: DinoKoll Porcelain Wall and Floor
One component thixotropic cement based adhesive, with improved adhesion and extended open time for the installation of porcelain, stoneware, natural stones indoors and outdoors, even for tile over tile application, and on heating screeds
DPWF:
– DPWF is abbreviation of Dinokoll Porcelain adhesive
for Wall and Floor tile corresponds EN12004 in C2TE class.
C2: refer to cement based adhesive improved adhesion.
-T: is adhesive with limited vertical slip.
E: is adhesive with extended open time.
⚫ Application:
– Usuall porcelain wall, floor and façade porcelain ceramic tile, natural and artificial stones inside and outside, terrace, balconies.
– Appling tile over tile and heating screed.
Advantages:
Easy to prepare and apply
-No sliding in vertical applications.
– Long using period, extend open time.
– The volum and density of adhesive.
– Water retainer and flexible.
– Helps in reducing the noise caused by footsteps.
Consumption:
– The best pulling adhesive with notched trowel and back of tile with thin spatula. The thickness of adhesive should not more than 10 mm and consumption of adhesive is about: 5 kg/m2 for normal size. and the water ratio is about (24% -28%) weight of adhesive.
|
> 1N/mm2 |
Initial tensile adhesion strength (after 28 days) |
| > 1N/mm2 |
Tensile adhesion strength after heat ageing |
|
> 1N/mm2 |
Tensile adhesion strength after water immersion |
| > 1N/mm2 |
Tensile adhesion strength after freeze-thaw cycle |
|
< 0.5mm |
Slip |
| 30 min |
Open time |
- Cleaning
After finishing the installation of porcelain and its grouting, the joints should be cleaned immediately with a sponge and water. Other than this, after the grouting material hardens, you must use a specialized cleaner material from Dinokoll to clean the remaining effects of cement and grouting materials.
- Storage:
The place where the adhesive is stored should be cool and dry, and the adhesive should be kept in a closed envelope.
The best consumption time is one year after the production date under the above conditions.
- Responsibility
This company fully accepts the qualitative and quantitative responsibility of all its products in accordance with the relevant standards and will be responsible for any deficiency. But matters of how to maintain, use, operate, and implement it are the responsibility of the respective customers.
- Safety measures:
This product contains Portland cement, which leads to an alkaline reaction when in contact with moisture. Use gloves while using the product; in case of direct contact with the skin, it will cause burning, dryness, and cracking of the skin. It may cause an allergic reaction.
In cases of direct contact with the eyes, it may cause sensitivity, burning in the cornea, or even chemical burns. In the event of contact with the eyes, wash with water for 20 minutes and then consult a doctor.
In addition, detachable elastics must be used every 25 square meters inside, every 10 square meters outside, and every 4 meters in height.
نقد و بررسیها
هنوز بررسیای ثبت نشده است.