Substructure primer _ PRIMER GS

Primer Gs:

– Insulating and strengthening primer with high penetration based on synthetic micro-resins for gypsum, anhydrite and cement-based substrates, for indoor and outdoor application.

Application:

-For strengthening brittle crumbling on the surface also with floor heating or cooling.

– For strengthening brittle renders crumbling on the surface.

– For insulating gypsum renders or screeds.

– For insulating anhydrite screeds also with floor heating or cooling.

To lock surface and interstitial dust in cement-based screeds.

– For adjusting the absorption rate of the application product and smoothing plasters.

– Compatible with every type of cement based adhesives or mortars.

– Professional use only.

Advantages:

– Creates a grid of acrylic micro particles with extremely high cohesion and penetration, to inhibit every expansion.

– For screeds or mortars, eliminates every crumbling and lock the yard surface dust.

Consumption:

– For passivating gypsum substrates use primer GS pure, for strengthening cement-based mortars or screeds dilute primer GS with clean water in a 1:1 or 1:2 ratios, depending on the substrate absorption. -The amount of consumption of this product is 150- 250 grams per square meter and applied on one level.

Instructions:

– primer GS must be applied by short bristle roller or flat brush.

MILKY COLOR	COLOR
≅24 mPa. S, rotor 1 RPM 100	VISCOSITY
≅11/95	PH
FROM +5° to +35°	TEMPERATURE RANG FOR APPLICATION
≥24 – minimum drying 2 hours	WAITING BEFORE LAYING
1:1 to 1:3	DILUTE WITH WATER